Category: Line Interactive Pure Sine Wave / Model Name: Radian 1000

Model Number: RD1000

Download Brochure

Check Alarm Code

Features

- Line Interactive with Stabilizer Design

- 100% Digitized Microprocessor Controlled

- Pure Sine Wave Output

- Automatic Voltage Reguration (+/-25%)

- Two in one design: Tower & Rack 19" case

- Network Transient Protector guards your network communications equipment from surges.

- DC Start (Power On UPS w/o line input utility)

- Short Circuit, Overload & Surge Protection

- Built-in Dry contact/RS-232/USB communication port

- Free of charge "WinPower" monitoring & controll S/W via LAN/WAN

- SNMP adaptor with "UPSnodeManger" via SNMP protocal

- MIB II standard for SNMP node management S/W

- Hot Swappable Battery

- CE Declaration of Conformity

Product Descriptions

Radian series of line interactive UPS provides pure sine wave AC output with better harmonic distortion than traditional line interactive UPS in step wave output. Radian series is available for 500VA, 750VA, 1000VA, 1500VA capacity. For data center with Rack mount demand, you can adapt the optional rack kit to install the Radious 1000VA & 1500VA in 19” rack. This series provides you satisfying reliable performance and maximize the flexibility for your system integration.SmartPower "Your Smart Choice for UPS".
*คลิกดูเทคนิค Line interactive pure sine wave

Type	Items	Specification
Capacity	Capacity	1000VA/600W
Input	Voltage Range	220 + 25% -23%VAC
	Frequency Range	50 +/- 10% Hz
	Phase	Single Phase with Ground
	Generator Input	Support
Output	Voltage Range	220 +/- 10% VAC
	Voltage Range (Batt.Mode)	220 +/- 10% RMS for entire battery voltage range
	Frequency Range	50 +/- 0.1% Hz
	Output Wave form	Pure Sine Wave
	Outlet	NEMA x 6
Overload Rating	Line Mode	110% shutdown after 3 minute; 130% shutdown after 10 cycles.
	Battery Mode	110% shutdown after 30 sec.;120% shutdown after 5 cycles.
Battery	Battery type	12V/7A (Sealed Lead-Acid Maintenance Free with suspended electrolyte) or on requested
	Number of Battery	2 pcs. or on requested
	50% load backup time	11 minutes
	1 PC backup time (typical)	35 minutes
	Battery hot swap	YES
	Battery Protection	Battery Overcharges/Battery deep discharge/Auto self test/Fan failure protection
	Recharge Time	< 6 hrs to 90%
Transfer Time	Transfer Time	2 ms.
Indicator	LED display	UPS status, Load Level, Battery Level, Fault
Audible Alarm	Battery Mode	Sounding every 10 seconds
	Low Battery	Sounding every second
	UPS Fault	Continuously Sounding
	Overload	Sounding every 0.5 second
	Battery Replacement	Sounding every 3 second
	Over charge	Sounding every 1.5 seconds
	Over termperature	Sounding every 2.5 seconds
	Charger fail	Sounding every 3 seconds
Dimension	Tower Case (LxWxH)mm	390x86x328 mm
Weight	Tower Case (kgs)	9.8
Environment	Operation Environment	0-40 C
	Relative Humidity	0-90% (Non-Condensing)
	Noise Level	<40dB @ 1 Meter
Interface	Smart RS-232 / USB	S/W supports Windows Family, Linux, Sun Solaris, IBM AIX, Compaq True64, SGI IRIX, FreeBSD, HP-UX and MAC
	External Slot (Option)	External Type of SNMP
International Standard	CE	Low Voltage Directive(Safety): EN62040-1-1, EMC Directive: EN62040-2 C2,EN62040-2,EN61000-3-2